Legionella control just got a whole lot easier

Having difficulty isolating water supply to service TMVs? Are your isolation valves passing or seized?

As time passes isolation valves may become seized or continue steadily to pass water when fully closed, or there could be no isolation at all set up. When these situations arise, there are many possibilities:

• Grab the pipe freezing kit.
• Call a pipe freezing specialist.
• Call the neighborhood water authority to isolate the mains supply.
• Conduct a complete system drain down.
• Go directly to the pub and leave it to another person.

But there’s a far better, cheaper, and quicker solution produced by the innovative team at Aladdin Products that will stop flowing water in its tracks, isolating cold or warm water within 3 minutes, allowing completion of works fast and regardless of the potential problems posed by insufficient isolation safely. Forget about pipe freezing, forget about water authority callouts, forget about return visits, forget about draining. Fit to the pipe simply, isolate supply, and complete the duty. The flow could be reactivated, and the working job completed in a fraction of that time period.

Aladdin EasyFit Isolator

The initial design of the Aladdin EasyFit Isolator allows an isolation valve to be fitted externally to a live pressurised pipe around 85°c, only using an 18v cordless tools and drill provided.
Aladdin EasyFit Isolators aren’t saddle valves – Observe how they just work at : https://aladdin-products.co.uk/animations

Aladdin EasyFit Isolators provide a patented dual seal technology, installing a full-flow quarter turn isolation valve right into a pressurised pipe in minutes, reducing water damage and mold, labour times and water wastage, maintenance could be completed with little if any disruption to other users. Only isolate where works should be completed, day could be completed very quickly maintenance which may have ordinarily taken a complete.

Aladdin EasyFit Isolators are WRAS approved quarter turn valves which are serviceable and feature a 10-year guarantee – 16 Bar rated.

Aladdin EasyFit Isolators install on 15mm, 22mm & 28mm copper and plastic pipe (CU, PEX, PB, & Hep2O).
NOW, allowing isolation of imperial ½” CU pipe, ideal for internal or external applications.

Aladdin Autovent

Do your radiators and towel rails require deaerating continuously? Prevent those unnecessary callouts, Aladdin Autovents could be retrofitted to existing radiators or installed on new installations to avoid manual venting, forget about removing covers to vent, once fitted venting is automated.

Aladdin Autovents will:

• Reduce system noise.
• Save heating/energy costs and optimise radiator efficiency.
• Avoid costly engineer call out charges to purge radiators.
• Forget about manual venting of radiators.
• Keep radiators hot to the very best.
• Stop gas in radiators thus reducing corrosion and extending the life span of heating components.

These automatic radiator deaeration valves are loved by landlords fully, homeowners, and heating engineers and also have a 5-year guarantee.

That are Aladdin Products?

Aladdin Products are developed and sold by NLB Engineering Ltd that was formed in January 2002 to commercially exploit the initial selection of automatic radiator de-aeration valves sold beneath the trademark: Aladdin® – the initial and only failsafe automatic radiator deaeration valve.

Aladdin Autovents were further developed with the second-generation design enabling the valve to be suited to all radiators.

In 2013 Aladdin Products launched the 15mm Aladdin EasyFit Isolator, enabling isolation of cold or hot pressurised pipes.

Following further development, and the success of the 15mm Aladdin EasyFit Isolator, came the 28mm and 22mm versions.

Visit  aladdin-products.co.uk  to find out more on the Aladdin EasyFit Isolator and the Aladdin Autovent.

-ends-

To possess your industry news published in the pages of FMJ’s news section, Month in FM, and here online on fmj.co.uk , please send your news and image to Danny Grange danny.grange@kpmmedia.co.uk

The view or information contained within these unedited pr announcements, are that of the ongoing company producing it rather than necessary the views of kpm.

Menu