In New York State, Stony Brook University Upgrades To LED Lighting


HAWAII University of NY (SUNY) may be the largest comprehensive system of universities, colleges, and community colleges in the U.S. with a complete enrollment of 424,051 students, plus 2,195,082 adult education students, spanning 64 campuses over the continuing state. SUNY includes many institutions and four university Centers – Albany, Binghamton, Buffalo, and Stony Brook.

Stony Brook is really a public sea-grant and space-grant research university in Stony Brook, NY, about 60 miles of NEW YORK on Long Island east. The university is made up of approximately 220 major buildings with a combined section of a lot more than 12.2 million gross square feet across 1,454 acres of land on the North Shore of Long Island. Stony Brook may be the largest single-site employer on Long Island. A lot more than 26,000 students are enrolled at the university, which includes over 15,000 employees and higher than 2,700 faculty.

Stony Brook University Medical Campus in Stony Brook, NY (Photo: Starco Lighting)

Stony Brook University took part in BuildSmart NY, an application made to pursue energy efficiency in every state buildings aggressively. In 2012, when then-Governor Andrew M. Cuomo signed Executive Order No. 88, it mandated a 20% improvement in energy efficiency performance in every state government-owned buildings by April 2020, year levels predicated on 2011 fiscal. The Executive Order designated the brand new York Power Authority (NYPA), the country’s largest state public power organization, to coordinate compliance.

As a turnkey partner, NYPA provided audit, design, procurement, construction closeout and management to a power improvement project at Stony Brook –  which centered on its entire medical campus. Palwinder Singh, EIT, CEM, PMP, may be the project engineer assigned to SUNY-Stony Brook. Because the project manager, his role would be to ensure timely completion of the project scope with reduced disruptions to facility operations and occupants. He’s in charge of all areas of the project budget and schedule.

Pres Energy of Getzville, NY may be the Engineer of Record, and Candela Systems Corp. of Hawthorne, NY was the cheapest qualified bidder on the LED lighting upgrades. A contract is had by both companies with the NYPA. Pres Energy was associated with the development and design where Candela implemented the scope of work.

Medical Campus Lighting Focus Of Work

The Stony Brook medical campus includes five major buildings totaling about 2.1 million square feet. The 19-story University INFIRMARY may be the largest building and includes a healthcare facility administration, patient rooms, operating rooms, the cafeteria, and doctors’ offices. The ongoing health Sciences Center is really a two-story building and includes classrooms, laboratory, library, and faculty offices. THE ESSENTIAL Science Tower is really a nine-story building which holds classrooms, labs, and offices. The Ambulatory Care Pavilion (ACP) covers two stories and carries a cancer care clinic, cancer test labs, and doctors’ offices. The Ambulatory Surgery Center (ASC) is really a single-story holding eight operating rooms, patient beds and doctors’ offices.

The power improvement project replaced existing lighting with LED lighting over the entire Stony Brook Medical Campus facilities. (Photo: Starco Lighting)

Because the facilities operate night and day, a week seven days, the lighting retrofit occurred during off hours as contractors had a need to work around personnel and had limited usage of rooms. However in 2019, they replaced the fluorescent T8 lamps with linear LED Lamps from Starco Lighting , headquartered in Buffalo, NY. Workers were confronted with ceiling heights from 8- to 40-feet because they performed the lighting retrofit including the replacement of 2, 3, 4 and 8-foot fluorescent tubes. The changeout was 1-for-1.

Starco’s LED lamps are warrantied for eight years – a substantial warranty for LED lamps available. The 10% lumen depreciation mark of these LED lamps has risen from 60k hours, at the right time, to over 90k hours. For operations playing around the clock, this feature was essential. Designers and engineers upgrade lighting to LED with only 10% clearance above the minimum specification. Most LED lamps in the marketplace depreciate by 10% every 26k hours. For a 24/7 operation, this implies the lighting shall fall below specification prior to the 3-year mark. With Starco’s LED lamps, the equation changes to a decade, or more than the 8-year warranty.

(Photo: Starco Lighting)

The project also contains using Starco’s Fused wiring kits. These kits enable a faster installation and mitigate any electrical risk that upgrading the wiring for the fixtures may have posed. These kits can be found in a number of combinations including with 1 socket, 2, 3, 4, and 6 and include different colors to tell apart lamps which are on a crisis line. Starco’s Fused wiring kits contain G13 lamp-holders created by AAG Stucchi, an Italian lamp-holder manufacturer. The 3000-series lamps-holders were redesigned in 2014 to take care of direct line voltage around 277V, conductor to conductor. This is simply not to be confused with the normal rating listed on a lamp-holder of 300V or 600V, which indicates the utmost voltage from conductor to ground. That’s not the rating between your contacts in the lamp-holders themselves. The redesign included increasing the minimum creepage distance between contacts of the lamp-holder and increasing the limit of insulating resistance between contacts of the lamp-holder from ½ MΩ to 2MΩ. There is absolutely no other lamp-holder manufacturer which has come and stated that they’ve done this out. In fact, several lamp-holder manufacturers, have recently come out and stated they do not authorize using their G13 lamp-holders with direct line voltage LED tubes.

A number of the other metrics that led to the specification of the lumen were included by the lamps output, efficiency, glare, robustness, safety, and reliability. Starco Lighting produces LED high bays, linear lights, industrial/commercial LED tubes, and some horticulture lighting. The company’s philosophy would be to create products which are strong enough for industrial but economical enough for commercial applications. This philosophy is due to their close relationships making use of their national customers round the country – design products with the end-user at heart and not simply another commodity to traverse the national supply chains. Because of these qualities and much more, Starco’s retrofit solutions were specified for the Stony Brook Medical Campus project.

Stony Brook pays 11 approximately.3 cents per kilowatt hour. The project to upgrade the fluorescent lighting included the replacement around 38,000 lamps or the upgrade around 19,000 fixtures. With the tube replacement part of the project costing roughly $2 million and the operation of the lighting being night and day, the easy payback was around three years excluding any maintenance savings. Stony Brook University is saving about $700k in energy savings annually and can turn to enjoy those savings and the improvement of lighting for around a decade. The expense of retrofitting the fixtures was a fraction of the expense of replacing the fixtures while still realizing 80-90% of the power savings. Furthermore, the campus can elect to displace with more energy conserving tubes in a decade without rewiring or electrical work needed as all the components are integral to the tube. This means that they will have a sustainable method of realizing a lot more energy savings later on without having to proceed through another intrusive and costly installation.

Menu